Fluid Components Intl AF Series User Manual

INSTALLATION, OPERATION AND
MAINTENANCE MANUAL
© Copyright 1999 Fluid Components Intl
a limited liability company
All Rights Reserved
7/20/94REV. A
01/19/99 REV. B
Notice of Proprietary Rights
This document contains confidential technical data, including trade
secrets and proprietary information which are the property of Fluid
Components Intl (FCI).
Disclosure of this data to you is expressly conditioned upon your assent
that its use is limited to use within your company only (and does not
include manufacture or processing uses). Any other use is strictly
prohibited without the prior written consent of FCI.
AF Series Flowmeter
Models AF88/AF89
Firmware Revisions 3.00 and earlier
Doc. No. 06EN003240 Rev. B

Fluid Components Intl AF Series Specifications

General

Brand	Fluid Components Intl
Model	AF Series
Category	Measuring Instruments
Language	English

Summary

Customer Service and Technical Support

Contact FCI by Mail

Provides mailing address for Fluid Components Intl customer service inquiries.

Contact FCI by Phone

Instructions for contacting regional representatives or the customer service department.

Contact FCI by Fax

Details for sending faxes to regional representatives for technical support.

International Support Contact

Guidance for product support outside the contiguous United States, Alaska, or Hawaii.

Document Revisions

Troubleshooting Guide

Troubleshooting Tools and Quick Checks

Lists necessary tools and outlines initial quick checks for troubleshooting.

Basic Instrument and Application Checks

Covers checks for serial numbers, power, installation, moisture, and design requirements.

Calibration and Parameter Verification

Details on verifying standard conditions and AF calibration parameters.

Hardware and Flow Element Checks

Focuses on checking hardware, flow element resistance, and voltages.

Transmitter and Output Checks

Procedures for checking flow transmitter voltages, A/D display, and analog output.

Spare Parts and Customer Service

Information on spare parts, defective parts, and contacting customer service.

Appendices

Appendix A: Drawings

Contains outline drawings and dimensional information for flow elements and enclosures.

Appendix B: Glossary

Provides abbreviations and explanations of terms used in the manual.

Appendix C: Customer Service

Details the customer service policy regarding returns, adjustments, and repairs.

Appendix D: Software Versions

Describes older software versions compatible with the flowmeter models.

Appendix E: CE Conformity

Provides information related to CE marking and conformity standards.