Fluke 6062A - Page 50

Position
Frequency
Bright Digit
FB float GZ
MZ
KZ
HZ
Position the bright digit in
the FREQUENCY display with
the stated resolution- For
example^ enter "FB1MZ" for a
1-MHz resolution.
Position
AM Bright
Digit
PB
float
PC Position
the bright digit in
the AM
display with
the
stated
resolution.
For example, enter
"PBIPC" for
a
resolution.
Edit KB float none Edit the current bright
digit
by float counts.
Edit
Amplitude
KA float none Move the bright digit to the
AMPLITUDE
display and edit
amplitude
by
float
counts.
Edit
FM
KD float none Move the bright
digit to the
FM display and edit
FM
by
float
counts.
Edit
Frequency
KF float
1
none
Move the
bright digit to the
FREQUENCY
display and edit
frequency by float counts.
Edit AM KP float none Move the bright digit to the
AM display and
edit
AM by
float counts.
FREQUENCY ENTRY
Frequency
Programming
FR float
GZ
MZ
KZ
HZ
Program displayed frequency
in units of;
gigahertz
megahertz
kilohertz
hertz
Relative
Frequency
SP
20/21
none Di sable/enable relative
frequency ope rati on.
Relati
ve
Frequency
RF
0/1
none Alternate
programming command
for disable/enable
relative
frequency
operation.
j
INTERFACE
MODE COMMANDS
Error
Mode EM
0/1
none Disable/enable
the clear
error mode. If disabled, the
IEEE-488 error
status is
cleared
only
when
inter-
rogated.
If enabled, the
error
status is cleared when
a new message
is
processed.
Record
Mode RM 0/1
none Disable/enable the record
mode. If disabled, the
message unit
is a
command.
If enabled,
a message unit
is a record. The message
unit
is the smallest group
of char-
acters
that the Generator
processes.