© 1995 - 2010 Fluke Corporation, DH Instruments Division Page 2
Warning
High pressure liquids and gases are potentially hazardous. Energy stored in these
liquids and gases can be released unexpectedly and with extreme force. High
pressure systems should be assembled and operated only by personnel who have
been instructed in proper safety practices.
© 2010 Fluke Corporation, DH Instruments Division All rights reserved.
Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any
form or by any means, electronic or mechanical, for any purpose, without the express written permission of Fluke Corporation, DH
Instruments Division 4765 East Beautiful Lane Phoenix AZ 85044-5318 USA.
DH Instruments makes sincere efforts to ensure accuracy and quality of its’ published materials; however, no warranty, expressed
or implied, is provided. DH Instruments disclaims any responsibility or liability for any direct or indirect damages resulting from the
use of the information in this manual or products described in it. Mention of any product does not constitute an endorsement by DH
Instruments of that product. This manual was originally composed in English and was subsequently translated into other
languages. The fidelity of the translation cannot be guaranteed. In case of conflict between the English version and other language
versions, the English version predominates.
DH Instruments, DH, DHI, molbox1, molbox1+, molbloc, molbloc-L, molbloc-S, molstic, COMPASS, CalTool are trademarks,
registered and otherwise, of Fluke Corporation, DH Instruments Division.
VCR is a registered trademark of the Swagelok Company.
Viton is a registered trademarks of DuPont deNemours Company.
Windows is a registered trademark of Microsoft Corporation.
Document No. 3540962
100226
Printed in the USA.
To Next Page