Chapter 5: Profiles
Asterisk (*) After the Profile Name
129
Asterisk (*) After the Profile Name
• When you make changes to the current profile (add or modify
tests, enter security keys, etc.) an asterisk appears after the
profile name in the shortcut bar, indicating that changes have
not been saved.
• When you make changes to the current AP Authorization list,
an asterisk appears after the profile name, indicating that the
associated ACL has been modified.
• If you cycle power, the OneTouch analyzer will retain the
changes and the asterisk will still be displayed. However, if
you load a different profile before saving the current profile
the changes to the current profile will be lost.
Open the Profiles Screen
You can tap the Profile name, which is in the shortcut bar at the
top of the screen.
Or you can tap the Tools icon on the Home screen, then tap
the Profiles button.
Save a Profile
To save a Profile:
1 Configure the analyzer as desired (add user tests, change
settings, etc.).
2 Tap the Profile name, which is in the shortcut bar at the top of
the screen.
3 Tap the SAVE button.
4 To create a new profile, enter its name and tap the DONE
button. To use the existing name, tap the DONE button.
To Next Page