Fluke VT06 Safety Information

 Do not disassemble or crush battery cells and battery
packs.
 Use only Fluke approved power adapters to charge
the battery.
 Batteries contain hazardous chemicals that can cause
burns or explode. If exposure to chemicals occurs,
clean with water and get medical aid.
 Disconnect the battery charger and move the Product
or battery to a cool, non-flammable location if the
rechargeable battery becomes hot (>50 °C) during the
charge period.
 Replace the rechargeable battery after 5 years of
moderate use or 2 years of heavy use. Moderate use is
defined as recharged twice a week. Heavy use is
defined as discharged to cutoff and recharged daily.
 Do not short the battery terminals together.
 Do not keep cells or batteries in a container where the
terminals can be shorted.
 Do not look into the laser. Do not point the laser
directly at persons or animals or indirectly off
reflective surfaces.
 Do not look directly into the laser with optical tools
(for example, binoculars, telescopes, microscopes).
Optical tools can focus the laser and be dangerous to
the eye.
 Do not open the Product. The laser beam is dangerous
to eyes. Have the Product repaired only through an
approved technical site.
 Do not use laser viewing glasses as laser protection
glasses. Laser viewing glasses are used only for
better visibility of the laser in bright light.
 See emissivity information for actual temperatures.
Reflective objects result in lower than actual
temperature measurements. These objects can pose a
burn hazard.
 Use only specified replacement parts.
 Have an approved technician repair the Product.
 Do not use the Product for medical reasons. The
product is intended for equipment evaluation only and
should never be used in diagnostics, treatment, or any
other capacity where the Product would come in
contact with a patient.

Fluke VT06 Specifications

General

Brand	Fluke
Model	VT06
Category	Thermometer
Language	English