Flurida FDHD10501 - Troubleshooting

9
2 4 4 1 2 M a i n S t . S u i t e 1 0 5 , C a r s o n , C A 9 0 7 4 5
TROUBLESHOOTINGS
Chart
Complaint
Possible Causes
Response
Unit is not workin
g
a. Power cord is unplugged.
b. There is no power at outlet.
c. Power cord is broken.
d. Control PCB is defective or
with wiring problems.
a. Plug in the power cord.
b. Check for outlet and breaker or fuse.
c. Call for service.
d. Call for service.
Icemaker is not
producing ice
a. There is ice in the ice mould,
but the icemaker is turned off.
b. There is ice in the ice mould,
but ice cubes are jammed.
c. There is no water in the ice
mould and the water fill tube
freezes.
d. There is no water in the ice
mould and the water filters are
clogged.
e. There is no water in the ice
mould and the icemaker is
defective.
f. There is ice in the ice mould,
but the icemaker is not
working.
g. There is water in the ice mould
but the cooling system is not
working.
a. Turn the icemaker on.
b. Clear the ice cubes.
c. Unplug the unit and remove the ice bin
then wait until fill tube is clear.
d. Bypass the water filters and check if ice
quality improves.
e. Call for service.
f. Call for service.
g. Call for service.
Icemaker is not
producing enough ice
or ice cubes are small
a. The freezer door is not closed
properly.
b. The water line is blocked and
the ice mould is not filled with
sufficient water.
c. The icemaker is not working
properly.
d. The cooling system is not
working properly.
a. Check for the door seal and door
opening.
b. Check for blockage.
c. Call for service.
d. Call for service.
Ice cubes are hollow
a. The icemaker thermostat is
defective.
b. The water line is blocked and
the ice mould is not filled with
sufficient water.
c. The cooling system is not
working properly.
a. Call for service.
b. Check for blockage.
c. Call for service
Ice cubes are frozen
together in the ice bin
a. If ice cubes haven’t been used
for a long period of time, they
may freeze together.
b. Ice cubes are produced
continuously because the
feeler arm is blocked up.
c. The freezer door is not closed
properly.
d. The icemaker is not working
properly.
e. The cooling system is not
working properly.
a. Pull out the ice bin and shake it or
remove the large clumps of ice cubes.
b. Clear ice cubes around the feeler arm.
c. Check for the door seal or door
opening.
d. Call for service.
e. Call for service.