8 9
2.2 FEATURES
• INFINITY BAR
• TRIPLE DEPOWER SYSTEM
• DEPOWER PERFORMANCE ENHANCER
• CONTINUOUS ADJUSTABLE BAR FORCES
• FRONT LINE SAFETY (FLS)
3. FLYSURFER EXTRA FUNCTIONS
3. 1. INFINITY BAR
The Flysurfer INFINITY BAR is the commando central of your Flysurfer Kite and offers diffe-
rent possibilities for meeting your personal demands.
3. 1. 1. Adjusting Depower Travel
In the case that the serial Depower path is too long for you (powered up, the INFINITY BAR
is 40 cm long from the trimmer to the upper edge of the bar), you can shorten it with mini-
mal effort:
Underneath the trimmer, the
double depower rope is fixed with
a square knot. Open this knot and
adjust to your preferred length. Do
not forget to re-fix the Depower by
making another knot!
The first picture shows the first
loop. Be careful with the second
loop, that it is pulled tightly against
the others. In this way, the rope
secures by itself.
In the second step, the black front line has to be
lengthened by the factor you reduced the length
of the double depower rope in step one The three
leader lines are all the same length measured
from the bar, when the trimmer is open and the
bar is fully powered up. This way, the trim is easy
to control from the bar.
The black leader line is knotted to the trimmer with a bowline knot. Loosen this lightly and
lengthen the line and then pull the knot tightly again. If you open the knot completely, you
will need to make a new bowline knot!
To Next Page
Loading...