Need help?Do you have a question about the Fluval 407 and is the answer not in the manual?
General| Flow Rate | 1450 L/h (383 US Gal/h) |
|---|---|
| Media Baskets | 4 |
| Filtration Stages | 3 |
| Filter Type | Canister |
| Filter Circulation | 931 L/h (245 US Gal/h) |
| Included Media | Foam, Activated Carbon, Biomax |
| Voltage | 120 V |
Describes the components and parts of the Fluval canister filter system.
Details on filter media setup, recommended placement, and maintenance for optimal performance.
Provides crucial safety precautions for operating the filter, including electrical hazards and use near children.
Outlines the recommended frequency for cleaning and replacing filter components like media and seals.
Details technical specifications for different Fluval 07 series models, including pump performance and dimensions.
Covers unpacking, aquarium preparation, and connecting the intake hose and strainer assembly.
Details output hose setup, filter media rinsing, and completing the canister cover assembly.
Covers final filter reassembly, gasket lubrication, and correct vertical positioning below the aquarium.
Explains how to prime the filter, start the pump, and adjust water flow using the AquaStop valve.
Instructions for rinsing, replacing, and maintaining filter media to preserve beneficial bacteria.
Covers putting the filter back together after cleaning and caring for the impeller and impeller well.
Details on primer replacement and product recycling guidelines according to WEEE directive.
Provides contact information for product questions, technical support, and authorized repair service.
Outlines the duration, coverage, and exclusions of the product warranty against defects.
Lists part numbers for Fluval 107, 207, 307, and 407 models for ordering replacements.
Details specific replacement parts for Vicenza, Venezia, and Roma aquarium models.
To Next Page
