Need help?Do you have a question about the Fluval Nano and is the answer not in the manual?
Covers electric shock, water leakage, damaged cords, and drip loops for safe operation.
Emphasizes supervision for children and restricted use for individuals with reduced capabilities.
Avoid touching moving/hot parts and disconnect power before handling or maintenance.
Specifies intended aquarium use, water type, temperature limits, and storage conditions.
Ensures secure installation, pump immersion, and safe use of extension cords.
Recommends thorough reading and understanding of the manual for product longevity.
Lists and labels all parts of the Fluval Nano Aquarium Filter for easy identification.
Disconnect power, do not plug in until setup is complete and water is filled.
Unpack, rinse parts, attach spray bar, install onto filter, and position in aquarium.
Ensure suction cups hold securely and adjust water flow using the control knob.
Details Bio-Foam, Fine Foam Pad, and Carbon Cartridge for debris and impurity removal.
Provides recommended monthly rinsing for foam media and bi-weekly replacement for carbon.
Outlines steps for replacing filter media, emphasizing partial replacement to retain bacteria.
Details how to clean the impeller and well monthly to maintain motor life and performance.
Warns against using soap or detergents, which can harm aquarium inhabitants.
Lists available replacement parts, Impeller (A-15002) and Motor (A-15000).
Details the 2-year guarantee against defects and conditions for repair or replacement.
Provides instructions and contact details for obtaining warranty service and support.
Explains the WEEE symbol and proper disposal procedures for electronic waste.
To Next Page
General
