Flux Basic Series - Product Features Overview; Detailed Component Features

FEATURES AND CONTENTS
Product Features
- Basic Series ( BC 261 )
FLUX T 160 B • 6.5” midwoofer, paper + sand coated cone
• 25mm v/c, vented steel basket
FLUX HT 25 B • 25mm v/c with special hand coated silk dome
FLUX XB 261 • 2 way Passive Crossover for BC261
• With adjustable tweeter level
• Single sided PCB with 2 OZ copper thickness to maximize signal
transfers
• Using selected silver solder to maximize contacts
• Selected component to maximize each frequency characteristic to
achieve the best tonal accuracy
- Spirit Series ( SC 261 )
FLUX T 160 S2 • 6.5” midwoofer, special coated paper cone
• 25mm v/c, vented steel basket
• Aluminium reverse dust cap
FLUX HT 25 S • 25mm v/c with special hand coated silk dome
FLUX XS 261 • 2 way Passive Crossover for BC261
• With adjustable tweeter level
• Single sided PCB with 2 OZ copper thickness to maximize signal
transfers
• Using selected silver solder to maximize contacts
• Selected component to maximize each frequency characteristic to
achieve the best tonal accuracy
- Maestro Series ( MC 261 )
FLUX T 160 M2 • 6.5” midwoofer, triple sandwich (paper+glass fi ber+silk) cone
• 25mm v/c with 84mm magnet diameter
• Aluminium die cast basket, vented basket
• Duralium phase plug
FLUX HT 25 M • 25mm v/c with special coated silk dome
• Duralium housing, screw connector
• vented magnet with additional rear chamber
FLUX XM 261 • 2 way Passive Crossover for BC261
• With adjustable tweeter level
• Single sided PCB with 2 OZ copper thickness to maximize signal
transfers
• Using selected silver solder to maximize contacts
• Selected component to maximize each frequency characteristic to
achieve the best tonal accuracy