Flyability Elios 3 - Page 19

ELIOS 3
3 – ELIOS 3 System specifications
THERMAL CAMERA
SENSOR
Lepton 3.5 FLIR
VIDEO RECORDING
RESOLUTION
160 x 120 at 9 fps
LENS
FOV 56° x 42°, Depth of field 15cm to infinity
SENSITIVITY (NEDT)
<50 mK
TEMPERATURE RANGE
-10°C to 140°C (14°F to 284°F)
WAVELENGTH (LWIR)
8-14 μm
LIGHTING SYSTEM
TYPE
High-efficiency LEDs for even lighting in front, top and bottom,
optimized for low impact of dust on picture quality.
CONTROL
From the remote controller, adaptive light beam controlled by camera
pitch
MODES
Normal mode (4x panels used)
Dustproof lighting (2x outer panels used only)
Selective/oblique lighting (left or right side only)
LIGHT OUTPUT
Designed for 16k lumens
OPERATION SAFETY AND CRASHWORTHINESS
NAVIGATION LIGHTS
One RGB navigation light on the rear of the drone
PROTECTION CAGE
Carbon fiber cage with soft coating, modular subcomponents for
maintenance ease, and thermoplastic elastomer suspensions.
COLLISION TOLERANCE
Tolerant to full stick collisions in SPORT-ASSIST on flat walls with lidar
payload installed. (<2m/s)
BATTERY LATCH SAFETY
SYSTEM
Sensor embedded in battery mechanism to alarm customer with
visual warning on drone and in Cockpit if battery lever is not closed
correctly.
FAIL SAFE
AUTO-landing on signal list
ORIGINAL INSTRUCTIONS
Page 19 of 24