Flykly Smart Ped - Connecting Bitride to Your Smart Ped

22
23
3.3 Which devices does the bitride app support?
Devices with Android 4.2.3 or newer are supported; iPhone 4s, iPhone 5,
iPhone 5s, iPhone 5c, iPhone 6, iPhone 6+ are also supported.
3.4 How much is the bitride app?
The bitride app is available for free.
3.5 How do you install the bitride app?
Depending on your mobile device, go either to the Apple Store or to Google Play
and search for the bitride app. The detailed procedure is listed in the following.
On iPhone:
o Open App Store
o Tap the search icon
o Enter “bitride” in the search field
o Select bitride in the search results
o Follow the standard installation procedure
o Register with a valid e-mail address
On Android:
o Open Google Play
o Tap the search icon
o Enter “bitride” in the search field
o Select bitride in the search results
o Follow the standard installation procedure
o Register with a valid e-mail address
3.6 Connecting bitride to your Smart Ped
!
NOTE: bitride connects trough bluetooth to your Smart Ped. When first
connecting to a factory resetted Smart Ped, you will need to give a name to it!
Once your Smart Ped is turned on (see 1.1), you can connect bitride to the
bike. Depending on your mobile device the procedure may change.
On iPhone:
o Open the bluetooth settings screen
o Tap your Smart Ped name
o Wait for connection
o Launch bitride
o Using the upper screen menu, select RIDE
o Press CONNECT
!
NOTE: If you have an iPhone bitride will auto-connect to your Smart Ped
after the first time the device is paired.
On Android:
o Launch bitride
o Using the upper screen menu, select RIDE
o Press CONNECT to access the connection menu
o Tap your Smart Ped name
o Wait for connection
!
NOTE: Once connected, your smartphone will auto-connect to your Smart
Ped if the device is in range and the Smart Ped is on, until you manually