16
17
1. INITIAL OPERATION
Just to remember, your Smart Ped is not permitted for competition and
race use. The Kick assisted e-bike can only be activated when the battery
state of charge is sufficient. In order to check the battery state of charge
of your Smart Ped please refer to 4.1.
If your Smart Ped is folding, please refer to the folding instructions
1.1 Turning on your Smart Ped
The Smart Ped turns on automatically when the rear wheel reaches a speed
higher than 5 km/h. To turn on your Smart Ped just start pedaling as usual
or spin the rear wheel while you lift the frame.
1.2 Turning off the Smart Ped
The Smart Ped automatically turns off when no activities are detected
within 2 minutes.
WHEN A SMARTPHONE IS CONNECTED the system will stay active for 10
minutes. If the Smart Ped is electronically locked, the system will stay active
as long as possible (see 4.2 for details).
RIDING YOUR Smart Ped
5.2 Trolley mode
This part applies to the folding model
Now you can use your smart ped in trolley mode by pushing it. Please be
careful NOT to pull the Smart Ped. It will not be drivable by pulling it.
5.3 Folding the handlebar 12
This part applies to the folding model
In order to fold the handlebar, remove the plastic protection by twisting it
and unlock the joint using the metal lever. The handlebar will fold down to
make your Smart Ped more compact.
To Next Page
Loading...