Flymo Contour 500E User Manual

Contour 500E CTE25
Contour 580E CTE27
Contour 650E CTE30
GB Operation Instructions
Turbotrimmer
®
GB

Flymo Contour 500E Specifications

General

Power	500 W
Cutting Width	25 cm
Line Diameter	1.5 mm
Cable Length	10 m
Corded/Cordless	Corded
Telescopic Shaft	Yes
Edging Facility	Yes
Power Source	Electric

Summary

1. SAFETY

General safety warnings

Provides essential safety precautions for operating the trimmer.

Safe operating practices

Details training, user responsibilities, and safe use procedures.

Preparation

Operation

Outlines safe procedures during use, including protective gear.

Maintenance and storage

Additional Safety warnings

Further safety advice concerning assembly and operation.

2. ASSEMBLY

To assemble the trimmer

3. OPERATION

To connect the trimmer

To set the work positions

Describes adjusting the trimmer for different tasks and body heights.

To start the trimmer

Details the procedure for safely starting the trimmer's motor.

To stop

To extend the cutting filament

4. MAINTENANCE

To clean the trimmer

To pull cutting filament manually

To replace filament cassette or cutting filament

Procedures for replacing worn-out filament parts.

To replace the cutting filament

5. STORAGE

To put into storage

6. TROUBLESHOOTING

7. TECHNICAL DATA

9. Service/Warranty