6
ASSEMBLY
• Switch off and disconnect
from the mains electricity
supply BEFORE REMOVING
OR REPLACING the fully
assembled debris bag.
To Fit Assembled Debris Bag To
Product (F)
IMPORT
ANT: Do not squeeze the
trigger when fitting the debris
bag (F1)
1. Ensure debris fin is horizontal
(F2) as illustrated in fig F.
2. Locate bag frame into clip on the
underside of product. (F3).
3. Lift handle towards product until
bag latch locates and click into
place. (F4)
To Remove Debris Bag From
Product (G)
1. Gently press bag latch (G1)
down. See fig G.
2. Lower handle of bag frame away
from product.
3. Move bag frame forward.
Assembly
G
1
To Next Page
Loading...
