
Do you have a question about the Flymo MINIMO and is the answer not in the manual?
Verify all parts are present before assembly.
Contact details for missing Flymo product parts.
Indicates general warnings and potential hazards.
Advises careful reading of user instructions.
Signifies disconnecting power before maintenance or cleaning.
Instructs to keep people and pets clear during operation.
Prohibits operation or leaving the product in the rain.
Recommends the use of eye protection during operation.
Rules for age, intended use, and operator condition.
Defines operator accountability for accidents and hazards.
Recommendations for RCD use and cable condition checks.
Guidelines for cable coiling, working, carrying, and disconnecting.
Information on voltage requirements and double insulation.
Advises wearing protective footwear and clothing.
Instructions for clearing the lawn and checking cutters.
Guidance on lighting, wet grass, and slope usage.
Rules for direction, hand placement, and avoiding hazards.
Procedures for stopping, leaving unattended, and handling blockages.
Importance of tightening parts and replacing worn components.
Caution regarding finger entrapment during adjustments.
Details on cable length, rating, and outdoor extension cables.
Information on Flymo connectors and splashproof construction.
Warnings regarding cut-off plugs and fuse requirements.
Step-by-step guide for assembling the handle.
Instructions for connecting the handle tube to the motor cover.
Steps for attaching the motor cover to the hood.
Instructions for starting the Flymo MINIMO.
Simple procedure for stopping the product.
How to adjust the cutting height by rotating the cutting head.
Steps to detach the cutting head and fan for cleaning.
Instructions for reattaching the cutting head and fan.
Advice on cutting edges and frequency for lawn health.
Guidance on preventing motor overload in thick grass.
Inspection of cutting head and plastic cutters for wear.
Instructions for replacing plastic cutters in pairs.
Steps for cleaning grass clippings from the product.
Tasks for maintenance at the end of the cutting season.
Guidance on safely carrying and storing the product.
Steps to diagnose and resolve operation issues.
Solutions for issues related to poor product flotation.
Diagnosing and fixing excessive vibration problems.
Advice on regular servicing and using genuine parts.
How to find and use authorized service centres.
Details on ISO 14001 and product recyclability.
Instructions for correct disposal of the product.
Terms and conditions for product guarantee coverage.
List of conditions that void the product guarantee.
Disclaimer regarding non-approved parts or modifications.











