Grassbox Instructions
Grassbox Full (M)
1. As the grassbox fills up, grass will be clearly visible
through the window in the lid (M).
2. When the window is full it is time to empty the grass-
box.
Emptying the Grass
• Stop the lawnmower, and wait until the blade has
stopped rotating BEFORE lifting the grassbox lid.
1. Lift grassbox lid. (N)
2. Lift out grassbox and empty. (P)
3. Replace grassbox and close lid carefully.
• Failure to fit the grassbox and grassbox lid correctly
will cause poor grass collection. Ensure there is no
grass trapped between the lid and the hood.
M
P
grassbox
is full
grassbox
is empty
Lift out box
N
K
Cutting over edges
To maintain hover, only hang the front of the mower over
the edge of the lawn/patio.
1. Use small forward and backward movements moving
along the edge (L1)
2. Push the mower along the edge as illusgtrated in fig L2
Do Not Overload Your Mower
Mowing long thick grass may cause the motor speed to
drop, you will hear a change in the motor sound. If the
motor speed drops you may overload your lawnmower
which may cause damage. When mowing in long thick
grass a first cut with the cutting height set higher will
help reduce the load. See Adjusting the Cutting Height.
L1
Mowing
1. For the best results mow the outside edge of the lawn
in a clockwise direction first. (K1)
2. Then start mowing the edge of the lawn nearest to the
power point so the cable is laid out on the lawn you
have already cut. (K2)
3. Mow twice a week during the growing season, your lawn
will suffer if more than a third of its length is cut at one time
and this may also result in poor collection.
L2
To Next Page
Loading...
Need help?
General
