FS-GR3E
接收机 Receiver
http://www.ysky-cn.com
Copyright ©2024 Flysky Technology Co., Ltd.
FS-GR3E is a receiver adopting AFHDS (automatic frequency hopping digital system). It has 3 channels and can
output PWM signal.
Introduction
Receiver Overview
Interface/Key introduction
CH 1 ~ CH2 Interface: Connects ervos, power supply or other components.
BIND/CH3 Interface: Used to connect the binding cable during binding, and to connect servos, power supply or other
components when not binding.
VCC Interface: Used to connect power supply.
SENS(i-BUS) Interface: For connecting i-BUS sensors.
FAIL SAFE KEY: Used to set failsafe.
Antenna
FAIL SAFE KEY
SIGNAL LED
VCC Interface
BIND/CH3 Interface
CH2 Interface
CH1 Interface
Product Specications
• Product Model: FS-GR3E
• Number of PWM Channels: 3
• Compatible Models: Cars or boats
• Compatible Transmitters: FS-GT2E, FS-GT2F or FS-GT2G
• Data Output: PWM
• Frequency Range: 2.4055 -2.475 GHz
• Bandwidth: 500KHz
• Number of Bands: 140
• Maximum Power: < 20dBm (e.i.r.p.) （EU）
• Receiver Sensitivity: -105dBm
• RF Protocol : AFHDS
• Modulation Type: GFSK
• Resolution: 1024
• ANT length: 26mm
• Input Power: :4.5-6.5V/DC
• Display: LED Indicator
• Online Update: None
• Faisafe: Yes( for channel 2)
• Dimensions: 37.6X22.3X13 mm
• Weight: 5g
• Certication: CE, FCC
To Next Page
Need help?
General
