Need help?Do you have a question about the FLYSURFER SOUL and is the answer not in the manual?
Warning against using the kite as a flying device, as it is illegal and dangerous.
Highlights the blend of construction with lightness and durability using X-Light fabric.
Details on the high-tenacity nylon fabric, UV resistance, and rigid foils for canopy stiffness.
Description of the swept back wing design facilitating instant reverse relaunch.
Explanation of marked bridle points for maintenance and PMAs for stability adjustment.
Information on deflate valves for quick deflation and improved trailing edge design.
Details on the high-quality, strong LIROS Dyneema core lines used for reduced diameter.
Step-by-step guide on how to lay out and prepare the kite for flight.
Procedures for untangling and organizing the kite's bridle lines.
Method for properly securing the kite when it's on the ground.
Detailed steps for launching the kite independently from the wind window edge.
Guide for launching the kite with assistance from a helper at the wind window edge.
Method for relaunching the kite by pulling leader lines towards you.
Technique for relaunching the kite by pulling a single steering line.
How the drainage system removes water or dirt from the kite.
Safest method for landing the kite with the help of another person.
Technique for landing the kite by stalling its flight.
How to land the kite using the quick-release safety system.
Steps to reset and relaunch the kite after activating the safety system.
How to perform a self-rescue maneuver in an emergency.
Recommended procedures for drying the kite after water contact.
Instructions on rinsing the kite, especially after saltwater use.
Essential checks to perform on the kite before each use.
Step-by-step guide for replacing the kite's sparepart lines.
Details on the LCL, its function, and replacement.
Instructions for repairing small tears in the kite's fabric.
How to perform a mixer test to check and adjust line lengths.
Procedure for checking and measuring bridle lines for stretch or shrinkage.
Guide on adjusting PMAs to fine-tune the aerofoil's profile.
How to adjust flying lines for optimal kite trim and performance.
Details on obtaining repairs and original spare parts for the kite.
Warning against using the kite as a flying device, as it is illegal and dangerous.
Highlights the blend of construction with lightness and durability using X-Light fabric.
Details on the high-tenacity nylon fabric, UV resistance, and rigid foils for canopy stiffness.
Description of the swept back wing design facilitating instant reverse relaunch.
Explanation of marked bridle points for maintenance and PMAs for stability adjustment.
Information on deflate valves for quick deflation and improved trailing edge design.
Details on the high-quality, strong LIROS Dyneema core lines used for reduced diameter.
Step-by-step guide on how to lay out and prepare the kite for flight.
Procedures for untangling and organizing the kite's bridle lines.
Method for properly securing the kite when it's on the ground.
Detailed steps for launching the kite independently from the wind window edge.
Guide for launching the kite with assistance from a helper at the wind window edge.
Method for relaunching the kite by pulling leader lines towards you.
Technique for relaunching the kite by pulling a single steering line.
How the drainage system removes water or dirt from the kite.
Safest method for landing the kite with the help of another person.
Technique for landing the kite by stalling its flight.
How to land the kite using the quick-release safety system.
Steps to reset and relaunch the kite after activating the safety system.
How to perform a self-rescue maneuver in an emergency.
Recommended procedures for drying the kite after water contact.
Instructions on rinsing the kite, especially after saltwater use.
Essential checks to perform on the kite before each use.
Step-by-step guide for replacing the kite's sparepart lines.
Details on the LCL, its function, and replacement.
Instructions for repairing small tears in the kite's fabric.
How to perform a mixer test to check and adjust line lengths.
Procedure for checking and measuring bridle lines for stretch or shrinkage.
Guide on adjusting PMAs to fine-tune the aerofoil's profile.
How to adjust flying lines for optimal kite trim and performance.
Details on obtaining repairs and original spare parts for the kite.
To Next Page
General