Cruise operations
1. Press any button of the positioning point 1-2-3-4 on the remote control to start automatic cruise after setting all the points
2. When reaching about 1m around the target point, the cruise ends. (There will be a distance display on the remote control screen,
and the displayed distance is the distance between the anchor point and the boat.) When the boat deviates or the position of the
boat is wrong, please re-calibrate
Remarks: If you want to cancel the positioning point cruise, you need to press the cancel button or the corresponding positioning
point button, and the boat will stop working
Frequency Matching
If the boat loses connection with the remote control, it needs to be re-paired.Turn off the power of the remote control and the
bait boat, and re-pairing the boat and the remote control. Put the boat on the ground, first press and hold the pairing button on
the remote control, then turn on the boat switch, and then turn on the remote control switch, when the remote control makes a
“beep”sound, the green indicator light on the remote control always on,indicating that the remote control and the boat have
been connected.
Fixed-speed cruise
1. Push the both remote control lever up at the same time to drive the boat go forward
2. Long press the fixed-speed cruise button to enter the fixed-speed cruise control mode
3. The remote control lever can fine-tune the direction of the boat
Remarks: After entering the fixed-speed cruise control mode, press the fixed-speed cruise button to exit
Boat power display
1. The LCD screen displays the battery power of the boat. There are 3 levels in total. When the battery icon has only 1 grid left,
it should be charged or replaced in time.
2. The boat is in a low power state, and the boat will automatically return to the origin point
Poor signal reminder
1. When the signal of the boat is poor, the red light of the remote control indicator will flash and make a "di" "di" prompt sound
2. When the boat is in a poor signal state for a long time, the boat will automatically return to the origin point
V020 gps bait boat
To Next Page
Loading...