FlyTek Zip - Machine Setup and Operation; Installation Guide; Filling the Water Tank; Electrical Connection

Remove the machine from the packaging and place it on a stable and horizontal surface, suitable to
supportitsweight,nearasuitablesocket.Werecommendkeepingthepackagingandallitspartsfor
possible future transport.
INSTALLATION
Removethesteelcovertoaccessthewatertank(ref.G).WE RECOMMEND THE USE OF A WATER
SOFTENER FILTER OR ANTI-SCALE BAG that must be periodically replaced. If this is not done scale
depositsmayforminsidethemachine,thesecanprejudicethecorrectoperationofthemachine,apart
fromthevalidityofthewarranty.Afterhavinginsertedthewatersoftenerlterinsidethetank,llthelatter
withdrinkingwater,possiblywithlowcalciumcontent.Thetankcanbelledusingafunnelandabottle.
FILLING OF THE TANK
Turnonthemachinepressingthegreenluminousswitchlocatedontheleftsideofthesamemachine;the
incorporated light turns on. As soon as the machine is turned on, the rapid heating process of the boiler starts.
Waitfortheheatinglight(ref.C)toturnon,whenthisoccursitmeansthatthewaterhasreachedtheoptimal
workingtemperatureandthemachineisreadytobeused.
TURNING-ON
CONNECTION TO THE ELECTRIC NETWORK
The power voltage of the machine is not modiable by the user. Before
connecting it to the electric network, check that the voltage of the network
corresponds to the power supply voltage of the machine indicated on the
identication plate.
Thecoeepouringspoutislocatedinthefrontpartofthemachine.
COFFEE POURING SPOUT (ref. B)
During pouring do not touch the spouts and do not approach your face to the
hot parts of the machine (burns hazard). The heating surfaces of the machine
are subject to residue heat even after use!
D
C
15