FlyTek Zip - Page 18

ANOMALY POSSIBLE CAUSE SOLUTION
Impossible or insucient
pouring of the coee
Water tank empty Fillthetank(page4).
Grindingtoone Useanewpod.
Contact the Supplier of the
pods.
The coees poured are cold
even if the lights (ref. C)
are on
Cold ceramic cups Preheatthecupswithhot
water,orusedisposable
cups.
Pouringtooslow Thewaterinthetankis
nishing,llthetank
(page4).
Faultyheatingsystem Contact the Supplier.
The pump makes too much
noise
Thewatertankisempty Fillthetank(page3)and
repeatedly press the key
(ref.D).
The “cream” is not enough
or completely lacking
Grindingtoocoarse Useanewpod.
Contact the Supplier of the
pods.
Coeenotfresh Useanewpod.
Contact the Supplier of the
pods.
Thewaterhasbeeninthe
tank for many days
Replacethetankwater
paying attention to the
correct reinsertion of the
probe.
18