Configuration D
Summary: parallel charging split pack (10s or larger).
Components:
1 PowerLab 6
1 power source
2 Safe Parallel Adapters
1 10s (or larger) split pack with center tap
Optional FUIM3 for computer support
PowerLab 6 mode (Normal or Expansion Channel): Normal.
PowerLab 6 maximum charge power: up to 500W charge to each of two packs
charged in parallel using 30VDC/1200W power source.
Constraints:
1 pack side per adapter.
Check pack polarity.
Same cell count for both sides.
Use discharge leads.
(Illustration next page)
To Next Page
Loading...