Need help?Do you have a question about the FMA PowerLab 6 and is the answer not in the manual?
Provides a quick guide to common PowerLab 6 tasks and operations, covering essential procedures.
Details basic one-pack charging through balance and discharge wires for a single unit.
Explains parallel charging of multiple packs using Safe Parallel Adapters for increased throughput.
Describes parallel charging for split packs (10s or larger) with a center tap connection.
Outlines using two PowerLabs to charge separate packs, each requiring its own power source.
General| Maximum Charge Power | 1000W |
|---|---|
| Data Logging | Yes |
| PC Connectivity | USB |
| Display | LCD |
| Input Voltage | 11 - 18V |
| Input Current | Max 40A |
| Charging Current | Up to 40A |
| Discharge Current | Up to 40A |
| Maximum Discharge Power | 1000W |
| Battery Types | LiPo, LiFe, NiMH, NiCd, Pb |
| Cell Balancing | Yes |
| Cell Count (Specific) | 1-8S (LiPo/LiFe/Li-ion), 1-30S (NiMH/NiCd), 2-24V (Pb) |
| PC Software | PowerLab Software |
To Next Page