Need help?Do you have a question about the FMC Bolens 826 and is the answer not in the manual?
General advice on preventing accidents through operator responsibility and anticipation.
Guidelines for safe operation of the snow thrower, including hazard avoidance.
Advice on throwing snow based on wind direction and discharge.
Techniques for clearing heavy snowbanks effectively.
Specifications for gasoline type, fuel capacity, and engine oil.
Step-by-step guide for starting the snow thrower engine using the recoil starter.
Procedure for safely stopping the snow thrower engine after use.
Instructions for starting the snow thrower using the electric start kit.
Diagnosing and resolving problems with the engine not starting or starting intermittently.
Troubleshooting engine overheating, rough idling, and power loss.
Resolving problems with the auger not turning or the snow thrower not moving.
Procedures for draining, refilling, and checking engine crankcase oil.
Important safety precautions regarding grounding and house wiring for the electric start kit.
Recommendations for storing the snow thrower in heated or freezing conditions.
Steps to prepare the snow thrower for long-term storage, including fuel and spark plug.
General| Type | Two-stage |
|---|---|
| Clearing Width | 26 inches |
| Engine Displacement | 8 HP |
| Intake Height | 20 inches |
| Auger Material | Steel |
| Manufacturer | FMC |
| Engine Type | Gasoline |
| Chute Control | Manual |
| Starting System | Recoil |
To Next Page