FMI BK User Manual

BK AND BKT BLOWER ACCESSORY
INSTALLATION INSTRUCTIONS
MODEL BK
MANUALLY CONTROLLED
BLOWER
MODEL BKT
THERMOSTATICALLY
CONTROLLED BLOWER
WARNING: ELECTRICAL GROUNDING INSTRUCTIONS This
appliance is equipped with a three-prong (grounding) plug for your
protection against shock hazard and should be plugged directly into
a properly grounded three-prong receptacle.
(Check your appliance owner's manual for specic applications and additional instructions.)
Parts included with this kit.
Tools required
Pliers•
Phillips Screwdriver•
Flat Blade Screwdriver•
If any of these pieces are missing or damaged, or if the installation instructions for your re-
place or stove are not included in this manual, contact the dealer where you purchased this
kit or FMI PRODUCTS, LLC at 1-866-328-4537 for referral information.
PART NO. DESCRIPTION QTY
119943-01 Blower assembly with speed
control and 6 foot cord
• • 1
104901-01 Wire assembly • 1
103650-01 Control Knob • • 1
103651-01 Lock Nut • • 1
11125 #8- 1/2'' Phillips Head Screw • • 1
101378-01 Thermodisc Switch, 100
° Limit • 1
104902-02 Switch Mounting Bracket • 1
109892-01 Speed Control Bracket
(Stamped Face Models)
• 1
109892-02 Speed Control Bracket (Panel
Louver Models)
• 1
BK
BKT

FMI BK Specifications

General

Brand	FMI
Model	BK
Category	Blower
Language	English

Summary

Removing Louver Panel

Wood, B-Vent, and Vent-Free Models Louver Removal

Instructions for removing louvers on non-direct-vent models using a screwdriver or fingertips.

Direct-Vent Models Louver Removal

Methods for removing louvers on direct-vent models using spring latches or bullet-style clips.

Model BK Wire Assembly

BK Blower Wiring Steps

Steps for wiring the Model BK blower, including attaching the power cord and ground wire.

Model BKT Wire Assembly

BKT Blower Wiring Steps

Steps for wiring the Model BKT blower, including ground wire and thermal switch connections.

Mounting Speed Control

Speed Control Mounting for Direct-Vent Models

Steps for mounting the speed control box for direct-vent fireplaces.

Speed Control Mounting for Panel Louver Models

Steps for mounting the speed control for models with panel louvers.

Speed Control Mounting for Stamped Face Louver Models

Steps for mounting the speed control for models with stamped face louvers.

Connecting Power and Operating Blower

Power Connection and Blower Operation Check

Procedure to connect power, check for obstructions, and test blower operation.