EasyManua.ls Logo

FMS 109753-KIM - Cleaning and Disinfection

FMS 109753-KIM
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 3
Failure to follow all applicable instructions may result in serious surgical consequences to the patient.
Do not use ammable agents when cleaning and disinfecting.
Do not wrap Remote Hand Control cable around metal objects. Wrapping cables around metal
objects may induce currents that could lead to electric shock, re and/or injury to patient or surgical
personnel.
This device has been tested and found in compliance with limits of medical devices according
IEC60601-1-2 standard. These limits are designed to provide reasonable protection in a typical
medical installation, against harmful interference when devices are located in close proximity. If the
pump is causing harmful interference with other devices, turn the main power off, then on again to
determine if it is causing the interference, relocate the system or separate it from other devices. If you
cannot resolve the problem contact DePuy Customer Service at 1-800-382-4682. In the European
Union, contact your local affiliate.
Disconnect the device from the pump when cleaning or inspecting.
PRECAUTIONS
Read the instructions, cautions, and warnings provided with all FMS VUE System accessories before
use. Your sales representative can advise which accessories are used with the FMS VUE System.
Electrical safety testing should be performed by a biomedical engineer or other qualied person.
INSTRUCTIONS FOR USE
Refer to the following documents for instructions for use with each system.
FMS VUE Operators Manual (Ref. 110665)
FMS NEXTRA Instruction Manual (Ref. 109652)
CLEANING AND DISINFECTION
This Remote Hand Control can be soaked and autoclaved.
DO NOT WET THE CONNECTOR.

Related product manuals