Need help?Do you have a question about the FMS HUMMER H1 and is the answer not in the manual?
General| Brand | FMS |
|---|---|
| Model | HUMMER H1 |
| Category | Motorized Toy Car |
| Language | English |
Provides an introduction to the manual and product, emphasizing it is not a toy.
Details general safety measures and warnings for operating the RC vehicle.
Declaration of conformity with RED 2014/53/EU for the radio equipment.
RF exposure compliance warning regarding antenna placement and usage.
FCC compliance statement for digital device emissions and interference.
Instructions for proper disposal of old electrical appliances.
Information related to the radio system specifications and safety symbols.
Discusses the history and development of the HMMWV and its civilian version.
Details the FMS HUMMER H1 RC model's design, features, and scale reproduction.
Lists key features and characteristics of the FMS HUMMER H1 RC model.
Provides technical specifications for the FMS HUMMER H1 RC model.
Overview of the 2.4GHz ANT Automatic Frequency Hopping Digital System transmitter.
Overview of the FMS-R7A receiver, including interface connections and LED status.
Information regarding the built-in antenna of the transmitter.
Instructions for mounting the receiver and connecting servos for stable signal.
Guidance on installing the correct batteries into the transmitter.
Step-by-step instructions for powering on the transmitter and receiver.
Explanation of the transmitter's LED indicators for power and status.
Procedure for binding the transmitter and receiver if needed.
Instructions for calibrating the steering wheel and throttle trigger.
Steps for safely shutting down the transmitter and receiver.
Details the assignment and function of each of the 7 transmitter channels.
How to reverse the output direction for specific transmitter channels.
Procedure for adjusting the trim values for steering, throttle, and other functions.
How to adjust the travel range (dual rate) for steering and throttle controls.
Configuration of the failsafe function to protect the model and personnel.
Instructions for restoring transmitter function parameters to default values.
Information about the idle alarm state when the transmitter is not in use.
Details on the transmitter entering sleep mode after a period of inactivity.
Alerts for low voltage conditions in the transmitter and system safety.
Important precautions and warnings for the FMS-R7A receiver.
Describes the receiver's low voltage and overheating protection features.
Explanation of the five modes for controlling model car lights via the receiver.
Details the different car light modes (Default, A, B, C, D) and their behaviors.
Receiver enters idle alarm state when transmitter values haven't changed.
Receiver enters sleep mode after being in idle alarm for 2 minutes.
Indicates when the transmitter detects the receiver is off or disconnected.
Technical specifications for the FMS-G7 transmitter.
Technical specifications for the FMS-R7A receiver.
Step-by-step guide on connecting the battery to the vehicle.
Essential safety precautions and guidelines for charging and handling LiPo batteries.
Instructions on how to open the tailgate of the vehicle.
Instructions on how to remove the roof of the vehicle.
To Next Page
