EasyManuals Logo

Focal Point BCD-85U User Manual

Default Icon
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Energy efficiency class
Energy class: A+
*Please refer to the installation instructions for more specific information on the size of aperture that you will require.
Important: when you install the appliance it is important to bear in mind its climate class.
In order to find out the climate class of the appliance you should check the rating plate.
4
3.0 TECHNICAL SPECIFICATION - CONTINUED
GB IE
©
2017 Focal Point Fires plc.
Before switching on. Make sure that it has been installed by a suitably qualified person, as per the information contained in
FOCAL POINT’s installation instructions.
After delivery, wait for four hours before connecting the appliance to the mains supply. This will allow any refrigerant gasses that may
have been disturbed during the transportation process to settle.
The outside of the appliance and the removable accessories contained within it should be cleaned with a solution of liquid detergent
and water.
The interior of the appliance should be cleaned with a solution of sodium bicarbonate dissolved in lukewarm water. The interior and
accessories should be thoroughly dried after the cleaning process has been completed.
There may be an odour when you first switch on the appliance. It will lessen as the appliance starts to cool.
Setting the temperature
The temperature in the appliance is controlled by the temperature control knob located behind the
freezer drawers. Rotate the control knob left or right to regulate the temperature inside the freezer.
On the temperature control, 1 is the warmest setting and 7 is the coldest setting. Under normal
conditions the temperature control should be set between 3 and 4.
Once the temperature control has been set, close the door and plug in the appliance. We recommend
that the door is not opened for a minimum of 2.5 hours to allow the appliance to reach standard
operating temperature.
Note: The standard operating temperature for the freezer compartment should be between -18°C and
-25°C.
Figure 2
4.0 USING YOUR APPLIANCE
Control panel
External control display No
External control display with LCD No
Temperature range (from>to) R:0~8 F: -18
Super Cooling (Fridge) No
Super Freezing (Freezer) No
Holidays function (Stand-by) No
ECO function No
Over temperature alarm No
Adjustable thermostat Yes
Control lamps No
Basics datas
Unit dimensions ( W / D / H ) 480x445x845
Depth with open door 90
Net weight 24.0
Voltage / frequency 220-240V/50Hz
mains fuse (intensity) 0.8
Input power R600a (A, A+, A++) 90
Input power R134a 120
Fridge compartment
Shelves:
Number/type 1/glass
Colour transparent
Shelf (on salad crisper) Yes/glass
Crisper(s):
Number / colour 1/ Transparent
Door:
Storage rack(s) (Total) 2
Butter and cheese compartment No
Inside colour White
Reversible door Yes
Lock Optional
Freezer compartment
Drawer(s) No
Shelve(s) No
Flap(s) No
Colour of drawer No
Shelf in the Freezer No
Door rack(s) No
Accessories
Defrost water outlet Optional
Interior light Yes
Special ice maker No
Ice cube tray(s) 1
Eggs tray(s) / Total number of eggs 1
Adjustable feet (front / rear) 2/0
Castors (front / rear) No
Wall spacer grid or distance holder Optional
Condensor Internal/ External
Lenght of cable/incl. plug (mm) 126
Packing dimensions
Packing dimensions ( W / D / H ) 500x465x870
Gross weight (kg) 26

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Focal Point BCD-85U and is the answer not in the manual?

Focal Point BCD-85U Specifications

General IconGeneral
BrandFocal Point
ModelBCD-85U
CategoryRefrigerator
LanguageEnglish