Focal Point BI600SS User Manual

INSTALLATION & USER INSTRUCTIONS
All instructions must be handed to the user
for safekeeping.
FREESTANDING OVEN
Revision B - 01/18
© 2018 Focal Point Fires plc
GB IE
1
Please note : Except where otherwise stated, all rights,
including copyright in the text, images and layout of this
booklet is owned by Focal Point Fires plc. You are not per-
mitted to copy or adapt any of the content without the
prior written permission of Focal Point Fires plc.
Focal Point Fires plc.
Christchurch, Dorset BH23 2BT
Tel: 01202 499330
Fax: 01202 499326
www.focalpointfires.co.uk
email : sales@focalpointfires.co.uk
MODELS COVERED BY THESE INSTRUCTIONS
BI600SS - BLACK GLASS WITH STAINLESS STEEL
BI600SI - SILVER GLASS WITH ENAMEL TOP
BI600BL - BLACK GLASS WITH ENAMEL TOP
IN THE UK ALWAYS USE A GAS SAFE REGISTERED ENGINEER TO INSTALL, REPAIR OR SERVICE THIS APPLIANCE
MODEL SHOWN: BI600BL
Image used for illustration purposes only

Focal Point BI600SS Specifications

General

Brand	Focal Point
Model	BI600SS
Category	Oven
Language	English

Summary

Important Notes and Safety Precautions

Environmental Disposal and Safety Advice

Appliance Specifications and Data

Appliance Installation Guide

Room Ventilation and Clearances

Covers room ventilation requirements (BS 5440) and installation clearances and dimensions.

Electrical and Gas Connection

Details electrical hookup, wiring, plug, and gas connection, pipework, and pressure settings.

Cleaning and Maintenance

Surface and Material Cleaning

Guide for cleaning enamel, painted, plastic, and metal parts using appropriate cleaning agents.

Glass and Chrome Parts Cleaning

Instructions for cleaning glass oven door panels and chrome plated oven shelves.

Light Bulb Replacement

Procedure for safely replacing the oven light bulb, warning about electrical shock.

Pan Bed Removal and Reassembly

Step-by-step guide for removing and refitting the appliance's pan bed.

Troubleshooting Common Issues

Ignition, Flame, and Fan Issues

Addresses common problems with ignition failure, uneven flame, and fan operation.

Guarantee Terms and Conditions