Do you have a question about the Focal Access 130 A1 and is the answer not in the manual?
Voice coil diameter | 1 inch |
---|---|
Magnet | Ferrite |
Tweeter magnet | Neodymium |
Nominal impedance | 4 Ohms |
RMS power | 60 W |
Type | 2-way |
Woofer | 13 cm |
Tweeter | 25mm (1") |
Diameter | 13 cm |
Mounting depth | 54.8mm (2.2") |
Details the advanced materials and design features of the Access range speakers.
Lists all the parts supplied with the 2/3-way kits, such as woofers, tweeters, and grilles.
Key advice for speaker installation and handling to ensure optimal performance and prevent damage.
Guidelines for optimal tweeter placement for improved imaging and frequency response.
Recommendations for cable quality, polarity, and connection procedures for optimal signal transfer.
Describes surface and flush mounting methods for installing the tweeter.
Guidance on locating and securing the crossover unit in a dry, ventilated area.
Explains how to use the crossover's toggle switch to adjust tweeter output level.
Provides detailed technical data including type, power, sensitivity, and dimensions for different models.
Tips on enhancing sound quality with accessories like sound absorbers.
Advice on selecting an amplifier with compatible power ratings for optimal speaker performance.
Recommendation for adding a subwoofer to enhance bass and system dynamics.
Details on Focal loudspeaker warranty coverage and validation requirements.