Need help?Do you have a question about the Focal CLEAR MG and is the answer not in the manual?
General| Impedance | 55 Ohms |
|---|---|
| Sensitivity | 104 dB SPL / 1 mW @ 1 kHz |
| Frequency Response | 5 Hz - 28 kHz |
| THD | <0.25% @ 1 kHz / 100 dB SPL |
| Type | Open-back circumaural |
| Weight | 450 g |
| Cable Length | 3m (balanced) |
| Connector | 3.5 mm jack and 6.35 mm adapter |
| Speaker Driver | 40mm M-shaped magnesium dome |
| Cable | OFC copper cable |
Specifies the circum-aural open-back headphone type.
Electrical resistance rating of the headphones.
Measures sound output per unit of power.
Measures Total Harmonic Distortion.
The range of audible frequencies the headphones reproduce.
Details of the speaker driver and its construction.
The physical weight of the headphones.
Information regarding the included audio cables.
Specifications of the included protective carrying case.
Essential guidelines for safe operation and health protection.
Highlights of the headphones' design and performance.
Detailed technical data for the headphones.
To Next Page
