Focal EASYA - System Setup and Connection; Connecting Speakers to Mains; Configuring Speaker Positions; Connecting the Hub Power Supply

EA
SY
A
User
manual
Setting up the system
Connect
the speakers to the
mains
using the cables supplied
for
your
region
[EU
or
U.S.]
Press the
"ON"
switch on the speakers to
turn
them
"ON".
On
the
amplifier
panel situated on the back
of
the speaker, select the
left
speaker
to the
"
left"
position and the
right
speaker to the
"right"
position (Fig.
A).
Loudspeaker position
Left
-
0
®)
®)
Q)
.
.
f
'
Connect
the
outlet
corresponding
to
your
region to the Hub power supply (Fig.
B).
Loudspeaker position
Right
Connect
the Hub to the
mains
using the standard
power
supply [do not use any
other
power
supply]
Plug in
the
power supply into the circul
ar
plug on the Hub identified
by
the
mark
ing
""7.5V
1A"
(Fig.
C).