Focal SCALA UTOPIA EVO - User Manual

Open the box. Remove the ramp
A
and the bottom
cap
1
.
Ouvrir le carton d’emballage. Retirer la rampe
A
et la
cale inférieure
1
.
Position the ramp
A
vertically at the base of the
speaker.
Positionner la rampe
A
à la verticale au niveau de la base
de l’enceinte.
Flip the box vertically. Remove the top cap.
Positionner le carton à la verticale.
Retirez la cale supérieure.
Carefully pull out the speaker using the strap.
Sortir l’enceinte à l’aide de la sangle.
SCALA UTOPIA EVO
UNPACKING/MOUNTING
DÉBALLAGE/MONTAGE SCALA UTOPIA EVO
1 2
3
4
• Accessories per speaker / Accessoires par enceinte
The components that must be handled in the steps described below are very heavy (>187lbs).
Les éléments à manipuler dans les étapes décrites ci-dessous sont très lourds (> 85 kg).
Therefore a minimum of 3 people is required to unpack this product.
Par conséquent un minimum de 3 personnes est requis pour procéder au déballage de ce produit.
!
MIN 3
Accessory box / Boîte d’accessoires
x 1 x 4 x 1 x 1 x 4
A
B
C
D E
A
1
A
!
MIN 3
Very heavy box. Handle with caution.
Caisse très lourde. Manipuler avec précaution.
!
MIN 2
The loudspeaker is heavy. Be careful when moving it
over the ramp.
L’enceinte est lourde. Attention au franchissement de la
rampe.

Focal SCALA UTOPIA EVO Specifications

General

Type	3-way floorstanding speaker
Frequency Response	27Hz - 40kHz
Sensitivity	92dB
Minimum Impedance	3.1 Ohms
Tweeter	Beryllium inverted dome
Woofer	11" 'W' cone
Nominal Impedance	8 Ohms
Midrange	6.5" 'W' cone
Finish	Various high gloss finishes

Summary

SCALA UTOPIA EVO Unpacking and Mounting

Accessory Identification

Identify all included accessories from the accessory box before proceeding with speaker unpacking.

Unpacking Steps 1-4

Initial steps for opening the box, removing protective elements, and preparing for speaker removal.

Unpacking Steps 5-7

Final unpacking and initial setup steps, including positioning and spike installation.

Critical Safety Precautions

Essential safety guidelines for handling heavy components, required personnel, and handling precautions.