Need help?Do you have a question about the Focal MAESTRO UTOPIA and is the answer not in the manual?
General| Sensitivity | 94dB |
|---|---|
| Nominal Impedance | 8 Ohms |
| Minimum Impedance | 3.1 Ohms |
| Type | Floorstanding |
| Crossover Frequencies | 2.2kHz |
| Drivers | 1" (27mm) Beryllium tweeter, 6.5" (16.5cm) W cone midrange, 11" (27cm) W cone woofer |
| Dimensions | 770 mm |
| Weight | 160 kg |
Safety instructions regarding Beryllium tweeter material.
Procedures for damaged Beryllium dome, including tape and contacting retailer.
Proper disposal and recycling of loudspeakers.
Welcome to Focal loudspeakers and philosophy "the Spirit of Sound".
How to break in the loudspeakers for optimal performance.
General advice on cleaning and placement.
Information about decoupling spikes and their use.
Rules for optimal speaker placement in a room.
Formula for ideal speaker positioning based on room dimensions.
How to connect speakers to amplifiers, emphasizing polarity.
Adjusting overall speaker response using jumpers.
Recommended room and electronics setup for linear response.
Adjusting the sub-bass level with jumpers.
Setting for a recessed sub-bass response.
Adjusting midrange slope to be sharper.
Adjusting midrange slope to be softer.
Increasing the tweeter output level.
Decreasing the tweeter output level.
Basic type and configuration of the loudspeaker.
Details of the speaker drivers used.
The frequency range the speaker covers.
The frequency at which bass response drops by 6dB.
Speaker efficiency in dB per watt.
The standard electrical resistance of the speaker.
The lowest electrical resistance of the speaker.
Frequencies where different drivers take over.
Suitable power range for amplifiers.
Physical size of the loudspeaker.
The total weight of the loudspeaker.
Details about the product warranty.
To Next Page
