To Next PageTo Next Page
Need help?Do you have a question about the Focal SM9 and is the answer not in the manual?
General| Type | 3-way active studio monitor |
|---|---|
| Frequency Response | 30Hz - 40kHz |
| Frequency Response Focus Mode | 90Hz - 20kHz |
| Maximum SPL | 116dB SPL (peak @ 1m) |
| Weight | 35kg (77 lbs) |
| Input | Electronically balanced, XLR |
| Midrange Amplifier | 100W, class AB |
| Treble Amplifier | 100W, class AB |
| Total Amplification | 600W |
| Tweeter | 1" pure Beryllium inverted dome |
| Midrange | 6.5" 'W' composite sandwich cone |
| Dimensions | 320 x 490 x 390 mm (12.6 x 19.3 x 15.4 in) |
Essential safety instructions, warnings, and precautions for operating the equipment safely.
Specific precautions for handling the Beryllium dome tweeter to avoid damage and exposure risks.
Lists carton contents and provides steps for safely unpacking the SM9 monitor.
Covers sound level warnings, hearing protection, and warranty terms for the SM9 monitors.
Details 3-way/2-way configurations, frequency responses, amplifiers, and transducers.
Instructions for checking and setting the mains voltage and ensuring the unit is properly earthed.
Guide to connecting audio signals via XLR, including balanced and unbalanced input configurations.
Recommendations for positioning the SM9 monitors for optimal near/mid-field listening.
Guidance on the initial run-in period for new SM9 drivers to achieve optimal performance.
Detailed explanation of the High-Pass Filter, LF Shelving, LF/LMF/MF EQ, and HF Shelving controls.
Description of the XLR input plug and the input sensitivity selector for different audio sources.
Explanation of front/side panel LED colors, their states, and corresponding troubleshooting solutions.
Explanation of the STANDBY/ON, FOCUS (2-way/3-way), and DIRECT INPUT switches on the side panel.
