Need help?Do you have a question about the Focal SUB6 and is the answer not in the manual?
General| Type | Active Subwoofer |
|---|---|
| Amplifier Power | 350W RMS |
| Outputs | XLR |
| Polarity | 0° / 180° |
| Frequency Response | 30Hz - 400Hz |
| Driver Size | 11 inches |
| Inputs | XLR |
| Maximum SPL | 116dB |
| Power voltage | 230V (or 115V depending on the country) |
| Low-pass crossover | Adjustable 50Hz to 150Hz, 24dB/octave |
Critical warnings about electric shock and device maintenance.
Comprehensive instructions for safe operation, placement, and care.
Statements on electromagnetic compatibility and electrical safety standards.
Core system specifications including frequency response and maximum SPL.
Details on input, amplifier stages, power supply, user controls, and indicators.
Information on woofer, high frequency driver, and shielding.
Specifications for cabinet construction, finish, dimensions, and weight.
System specifications including frequency response and maximum SPL.
Details on input, amplifier stages, power supply, user controls, and indicators.
Information on woofer, high frequency driver, and shielding.
Specifications for cabinet construction, finish, dimensions, and weight.
System specifications including frequency response and maximum SPL.
Details on input, output, amplifier, processing, controls, indicators, and power supply.
Information on the subwoofer drive unit.
Specifications for cabinet construction, finish, dimensions, and weight.
Instructions for unpacking the Solo6 Be, Twin6 Be, and Sub6 units.
Important information and precautions regarding the beryllium dome tweeter.
Overview of warranty coverage and how to obtain details.
Adjustment for subwoofer sound level relative to main loudspeakers.
Switch to mute the subwoofer output signal.
Settings for high-pass filters for main speakers in 2.1 configuration.
Adjustment for the subwoofer's low-pass filter cut-off frequency.
Switch to invert the signal polarity on the subwoofer channel.
Fine adjustment for phase on the subwoofer channel.
Input for footswitch to mute sub and defeat hi-pass filters.
Description of the power LED indicator.
Description of the two-way active loudspeaker.
Description of the three-way active loudspeaker.
Description of the active subwoofer for monitoring systems.
Guidance on setting voltage and earthing the units.
Explanation of XLR input for balanced signals and specific Sub6 connections.
Recommendations for placing Solo6 Be and Twin6 Be for optimal listening.
Guidance on vertical/horizontal positioning and midrange driver selection.
Advice on positioning the subwoofer for best sound balance.
Information on the necessary run-in period for new loudspeaker drivers.
Control to select which driver reproduces midrange frequencies.
Adjusting input sensitivity for different audio sources.
Continuous adjustment for high frequency level.
Continuous adjustment for low frequency level.
Location and function of the power LED.
To Next Page
