EASY
A
User
manual
•
Bluetooth®
wireless
technology
input:
In
order
to
link
a device
with
the Hub, it
must
be
Bluetooth®
compatible
and the aptX®
"Bluetooth®"
input
must
be
selected on the Hub.
There are
two
ways to set the Hub to
linked
mode:
•
By pressing and holding down the sync
button
located on the back of
the
Hub
for
3 seconds.
•
By pressing and holding down the
"Down
Arrow"
remote
control
button
for
3 seconds.
When the Hub is in
Bluetooth
linked mode, the aptX®
Bluetooth®
input
LED on the
front
starts
to
flash
quickly
.
The Hub is
identifiable
on the linked device as "Focal
Bluetooth
Receiver
Hub"
.
To
complete
the link, please
refer
to
the
manual
for your device
for
linking with the Hub.
If
no
device
is
linked within
30
seconds, the Hub
will
exit linked mode.
Once a device has been linked
with
the
Hub, it
will
remain
in
the
memory.
Link
ing only needs to take place once. The
Hub can store
twenty
linked devices.
If
more
than
twenty
devices are linked
with
the
Hub, it replaces the
oldest
device
with
the
most
recent one linked.
Only one device at a
time
can
be
linked
with
the Hub.
If
you
want
to
connect
a device,
ensure
that
no
other
devices
are already connected.
It is advisable to increase the
volume
of the device connected to the Hub and to
control
the
volume
using the
supplied
remote
control.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
