Focal ELECTRA IC 1002 User Manual

FIRE-RATED BACKCAN
ELECTRA IC 1002, 300 ICW 4, 300 ICW 6, 300 IW 6,
100 ICW 5, 100 ICW 6, 100 IC 6ST, 100 ICW 8, 100 IW 6
Démarrage rapide / Quick Start
L’accessoire FIRE-RATED BACKCAN est un boîtier coupe-feu. Il est compatible avec les produits Focal ci-dessus.
The FIRE-RATED BACKCAN is a fire-resistant speaker enclosure. It is compatible with the Focal products above.
INSTALLATION DANS UN MUR OU AU PLAFOND
INSTALLATION IN A WALL OR CEILING:
Déterminer l’emplacement du haut-parleur.
Decide on the speaker location.
1
Acheminer les câbles à cet emplacement.
Route the cables to the chosen location.
2
Fixer le boîtier coupe-feu sur les montants/solives
en utilisant les trous pré-percés situés sur les
retours latéraux en utilisant au minimum 4 vis de
4 mm de diamètre et 3 cm de longueur. Utiliser
une vis sur chaque coin.
Fix the fire-rated backcan on the studs or joists,
using the pre-drilled holes on the side flanges,
using at least 4 screws, 4mm diameter and 3cm
long. Use one screw on each corner.
Installer le presse-étoupe dans l’ouverture
prévue à cet eet.
NOTE : un deuxième presse-étoupe est fourni.
Il permet d’acheminer le signal audio amplifié
à d’autres enceintes. Une seconde ouverture
défonçable est située à l’opposée de la première.
Pour ce faire, enfoncer la pièce pour libérer
l’ouverture.
Fit the cable gland into the opening provided.
NOTE: A second cable gland is provided, to route
the amplified audio signal to other speakers. A
second removable knockout is provided opposite
the first one. Knock the removable part out to
make an opening.
3
Le kit comprend :
Kit contents:
A - 1 x boîte coupe-feu
1 x Fire-rated backcan
B - 2 x presse-étoupes
2 x cable glands
4
B
A

Focal ELECTRA IC 1002 Specifications

General

Woofer	No
Tweeter	Yes
Speaker type	2-way
Tweeter diameter	25 mm
Number of drivers	2
Speaker placement	Ceiling-mountable
Audio output channels	1.0 channels
Mid-range driver diameter	165 mm
Number of tweeter drivers	1
Tweeter diameter (imperial)	1 \
Mid-range driver diameter (imperial)	6.5 \
Product color	White
Housing material	ABS synthetics
Recommended usage	Other
Recommended amplifier power (max)	150 W
Recommended amplifier power (min)	25 W
Impedance	8 Ω
Sensitivity	88 dB
Frequency range	60 - 30500 Hz
RMS rated power	- W
Crossover frequency	2600 Hz
Transducer material	Aluminum
Connectivity technology	Wired

Weight and Dimensions

Depth	96 mm
Weight	2100 g
Diameter	253 mm

Summary

Fire-Rated Backcan Quick Start

Kit Contents

Details the items included in the fire-rated backcan kit: one fire-rated backcan and two cable glands.

Product Description

The FIRE-RATED BACKCAN is a fire-resistant speaker enclosure compatible with specific Focal products.

Installation in a Wall or Ceiling

Determine Speaker Location

Decide on the correct location for the speaker installation.

Route Cables

Route the audio cables to the chosen speaker location.

Install Cable Gland

Fit the cable gland into the designated opening for cable entry.

Secure Backcan to Structure

Fix the fire-rated backcan to studs or joists using at least 4 screws (4mm diameter, 3cm long).

Pass Cable Through Gland

Pass the cable through the gland and backcan, leaving sufficient length for connection.

Cut Plasterboard Opening

Cut an opening in the plasterboard matching the pre-fitting kit's internal dimensions.

Affix Pre-fitting Kit

Attach the pre-fitting kit to the fire-rated backcan at the speaker's exact future location.

Align and Fix Plasterboard

Fix the plasterboard so the opening aligns with the pre-fitting frame.

Complete Speaker Installation

Refer to the speaker user manual for final installation steps.