Focal FPP1000 - Advanced Control Functions; Crossover and Frequency Settings; Remote and Fader Functions

Focal PoWER PERFoRMaNcE
User manual / manuel d’utilisation
9
CROSSOVER : The CROSSOVER switch permits to activate, up to your choice, a high-pass filter (HPF), a low-pass
filter (LPF) or no filter at all (FULL).
FREQ : The FREQ potentiometer permits to determine the cut-off frequency of the selected filtering mode. In HPF
position, this frequency will be the frequency from which the signal will be transmitted to the speakers.
REM : The REM connector ensures the link between the amplifier and the source (car radio) via a REM or REMOTE
car radio output. It permits the automatic amplifier switch on as soon as the source is switched on (car radio).
EXTERNAL REMOTE CONTROL : The remote control supplied with the FFP 1000 amplifier permits to control
the speaker output level in order to independently manage the subwoofer level. The remote control supplied with
the FPP 4100 amplifier permits to control the REAR speaker output level only for channels 3 and 4. The remote
control supplied with the FFP 5300 amplifier permits to control the speaker output level of SUB channel in order to
independently manage the subwoofer level.
FADER : Reproduces the audio signal of levels 1 and 2 on levels 3 and 4.
FADER SUB : Reproduces the audio signal of levels 1 and 2 on the sub levels.
17
18
19
14
15
16