Need help?Do you have a question about the Focal FPS 4160 and is the answer not in the manual?
General| Signal-to-Noise Ratio (SNR) | 92 dB |
|---|---|
| RMS power output per channel (2 Ohm) | 400 W |
| RMS power output per channel (4 Ohm) | 240 W |
| Product color | Black, Silver |
Weight and Dimensions| Depth | 254 mm |
|---|---|
| Width | 429 mm |
| Height | 59 mm |
Crucial instructions to prevent accidents, fire, electric shock, and serious injuries.
Important precautions for safe installation and handling of the amplifier.
Guidance on wiring, duration of operation, and cooling system.
Essential steps and rules to follow before beginning amplifier installation.
Best practices for routing cables and ensuring proper chassis ground connection.
Instructions for securely mounting the amplifier in the vehicle using provided screws.
Table specifying recommended power supply wire gauge by amperage and cable length.
Guidelines for routing signal, remote, and power cables to avoid interference.
Connecting RCA, REMOTE, and speaker cables, ensuring correct polarity.
Connecting the remote control cable and the positive power supply cable to the amplifier.
Procedure for implementing the fuse holder on the positive power cable for safety.
Connecting speaker cables and configuring bridged mode for subwoofers.
Steps for powering up the system and adjusting gains for optimal performance.
Procedure for connecting the external power supply module to the amplifier.
Procedure for safely disconnecting the external power supply module.
Diagram of the FPS 1500 amplifier's ports, controls, and connectors.
Diagram of the FPS 2160 amplifier's ports, controls, and connectors.
Diagram of the FPS 2300RX amplifier's ports, controls, and connectors.
Diagram of the FPS 4160 amplifier's ports, controls, and connectors.
Connecting audio sources and adjusting amplifier input signal level.
Selecting operating modes and configuring crossover filter types.
Adjusting crossover frequencies using potentiometers and selectors.
Details on power, signal connections, protection indicators, and fuses.
Adjusting bass boost, subsonic filter, phase, and remote gain.
Using fader, secondary gain adjustment, and mute functions on specific models.
Setting direct mode and adjusting the subsonic crossover frequency.
Configuring crossover filters and bass boost levels.
Adjusting the low-pass filter frequency between 50-500Hz and 50-5000Hz.
Adjusting bass boost and high-pass filter frequencies for specific models.
Setting high-pass filter frequencies from 50-500Hz and 500-5000Hz.
Setting low-pass filter frequencies from 50-500Hz and 500-5000Hz.
Configuring bandpass filter frequencies between 50Hz and 500Hz.
Configuring bandpass filter frequencies between 50Hz and 5000Hz.
Direct mode and high-pass filter settings for the Focal Power Symmetric 2300RX.
High-pass and low-pass filter adjustments for the Focal Power Symmetric 2300RX.
Setting high-pass and low-pass filters for the 2300RX between 500-5000Hz and 50-500Hz.
Setting low-pass filters for the 2300RX between 50-500Hz and 50-5000Hz.
Configuring bandpass filters for the 2300RX between 50Hz and 500Hz.
Configuring bandpass filters for the 2300RX between 50Hz and 5000Hz.
Direct mode and crossover settings for the Focal Power Symmetric 4160.
Adjusting fader and bass boost controls for the Focal Power Symmetric 4160.
Setting high-pass filter frequencies for the 4160 (50-500Hz and 500-5000Hz).
Setting low-pass filter frequencies for the 4160 (50-500Hz and 50-5000Hz).
Setting high-pass filters for the 4160 between 50-500Hz and 500-5000Hz.
Setting low-pass filters for the 4160 between 50-500Hz and 50-5000Hz.
Configuring bandpass filters for the 4160 between 50-500Hz and 500-5000Hz.
Setting low-pass filters for the 4160 between 50-500Hz and 500-5000Hz.
Details on RMS power output, bridged mode power, and frequency response.
Specifications for distortion, signal-to-noise ratio, crosstalk, and impedance.
Details on high-pass, low-pass, bandpass, and subsonic crossover settings.
Specifications for bass boost frequency, input sensitivity, and input impedance.
Information on amplifier protections, standby consumption, and fuse ratings.
Instructions for registering your Focal product to validate the warranty.
Fields for customer interests, equipment, and purchase details for warranty validation.
To Next Page
