23
EN
POLYGLASS
User manual
Please validate your Focal-JMlab warranty,
it is now possible to register
your product online:
www.focal.com/warranty
Our policy of continual product improvement means
that Focal-JMlab reserves the right to modify the technical specifications
of its products without notice. Product may vary from images.
Thank you for choosing Focal Polyglass kits, and for sharing
our passion for sound and for music. Designed using acoustic
technologies, these speakers integrate Focal’s perfectionist
believes, developing products with high power handling,
and unrivalled sound quality. To obtain the best results from
this product, we recommend that you follow carefully all the
information contained in this user’s manual. If not correctly
followed, any fault observed may not be covered by the warranty.
Important recommendations
First of all, check the space available for fitting the speaker drivers
(refer to the plans on the packaging) then proceed with the cutting
required. If mounted in the factory location, check that there is
sufficient space between the speaker driver and the protective grille.
• Clear the speaker drivers of any metal shavings and dust particles.
• Clean carefully before mounting the speaker drivers.
Conditions of warranty
All Focal loudspeakers are covered by warranty drawn up by
the official Focal distributor in your country. Your distributor can
provide all details concerning the conditions of warranty. Warranty
cover extends at least to that granted by the legal warranty in force
in the country where the original purchase invoice was issued.
To Next Page
Loading...
Need help?
General
