16
SHAPE
™
Once you have decided on positioning, you have 4
height adjustable decoupling spikes. These spikes
enable you to significantly reduce the mechanical
coupling of the loudspeakers to the surface on which
they rest. They also make it possible to adjust the
vertical orientation of the loudspeakers (fig. G). The
spacing and left/right orientation of each loudspeaker
allows you to control the width, centring and overall
coherence of the soundstage (left/centre/right), the
basis of the precision of your recordings.
Stereo Positioning
We recommend that you position the loudspeakers
in such a way as to make an equilateral triangle. The
3 points of the triangle are the listening position, the
right-hand loudspeaker and the left-hand loudspeaker
(fig. H).
Multichannel Positioning
For a 5.1 installation, we recommend that you position
the loudspeakers in a circle so in order to have them
equidistant from the listening point. The centre
channel will be at 0°, the right front channel at 30°,
the right rear channel at 110°, the left rear channel at
250° and the left front channel at 330° (fig. I).
User Manual
G H
30°
110°
250°
330°
I
To Next Page
Loading...
Need help?
General
Weight and Dimensions
