Focal ST6 - Page 35

35
ST6
Professional Analogue Monitoring System - User Manual
EN
All specifications are subject to change.
Performance SUB12
• Frequency response (@ - 3dB) 28Hz – 400Hz
• Maximum SPL
(Average CEA2010B 30–200 Hz free field @ 1m)
124.5dB
Electronic section
• Input Balanced XLR LFE 10kΩ, Left & Right 10kΩ
• Outputs Balanced XLR LFE (in parallel), Left & Right 50Ω
• Bass amplifier stage 600W RMS, G-class
• Nominal power supply 100–120V~ 50/60Hz
220–240V~ 50/60Hz
• Nominal power consumed 180W
• User controls Sensitivity, Stand-by, Polarity, Phase, LPF, Volume, HPF
• Fuses ~100–120V, T10AL/250V
~220–240V, T5AH/250V
• Internal signal processing and functions
- Subwoofer section
Left/right mono summation
LFE + mono low-pass
24dB/octave
Phase adjustment
Polarity selection
Switchable high-pass crossover,
cut-off frequency selection
24dB/octave
• Outputs (to satellites)
- Type / Impedance
- Connector
Right, left
Electronically balanced / 50Ω
3-point male XLR
Transducers
• Bass 1 x 13"(33cm) ‘W’ cone
• Shielding no
Loudspeaker
• Construction 1
1/8
" (30mm) MDF
• Finish Dark red natural veneering side panels, black body
• Dimensions(HxWxD) 23
5/8
"x19
1/8
"x22
3/8
" (600mmx487mmx568mm)
• Weight 127.87lbs (58kg)
• Temperature range During use: 5–35°C
During storage: 0–50°C