Need help?Do you have a question about the Focal Twin6 Be and is the answer not in the manual?
General| Frequency Response | 40Hz - 40kHz |
|---|---|
| Amplification | Active |
| Amplifier Power (Midrange) | 100W |
| Inputs | Balanced XLR |
| Maximum SPL | 115dB SPL |
| Woofer | 6.5" |
| Tweeter | 1" inverted dome |
| Input sensitivity | +4dBu or -10dBV |
| Cabinet | MDF |
| Finish | Black |
Essential safety guidelines, warnings about shock hazards, and device handling.
FCC and Industry Canada statements for device operation.
Defines the acoustic performance range of the speaker.
Details the electronic components and controls of the speaker.
Describes the speaker drivers and magnetic shielding.
Specifies the physical build, materials, and dimensions.
Defines the acoustic performance range of the speaker.
Details the electronic components and controls of the speaker.
Describes the speaker drivers and magnetic shielding.
Specifies the physical build, materials, and dimensions.
Defines the acoustic performance range of the subwoofer.
Details the electronic components, processing, and controls.
Specifies the subwoofer driver unit.
Specifies the physical build, materials, and dimensions.
Guidance on how to unpack the loudspeakers and subwoofer.
Information on the beryllium tweeter and handling precautions.
Details on the product warranty and coverage.
Diagram illustrating the rear panel of the Solo6 Be.
Diagram illustrating the rear panel of the Twin6 Be.
Visuals for setting up speaker orientation and drivers.
Detailed layout of the Sub6 rear panel controls and connectors.
Explanation of Level, Mute, Hi Pass, Lo Pass, Polarity, Phase controls.
Description of the 2.1 Bypass and Power LED indicator.
Instructions for setting mains voltage and earthing the units.
Guidance on XLR input and balanced/unbalanced signal connections.
Details for Stereo+Sub and Multichannel LFE input configurations.
Recommendations for placing Solo6 Be and Twin6 Be for optimal listening.
Advice on positioning the Sub6 for best acoustic performance.
Instructions on the initial break-in period for new speakers.
Control for selecting the midrange driver on Twin6 Be.
Adjustments for input level and frequency response contours.
Location and function of the power status LED.
Adjusting subwoofer volume and muting the signal.
Setting crossover frequencies for system integration.
Controls for phase alignment, polarity, and 2.1 system bypass.
To Next Page
