Focus Bikes R.A.T. User Manual (English)

To Next Page

Insert the R.A.T. axle with open lever in the

correct position.The T-end of the axle should

be aligned with the insert.

Rotate the axle 90° clockwise till the T-End is

stopped by the insert. Never overtighten the

axle or use a lot of force to turn it.

The axle should rotate easily.

Flip the lever appr. 180° until it stops.

Turn to adjust play

If the lever is clamping to much/less adjust the

preload nut until the lever is clamping stoutly.

Incorrect closed lever or low clamping force could

result in disengagement of the wheel may result in

injuries or death

R.A.T.

MANUAL

1973K0415011

.A.T. thru -axle s are sold u nder licence in the UK (UK patent GB2414971B)

Need help?

Do you have a question about the Focus Bikes R.A.T. and is the answer not in the manual?

Focus Bikes R.A.T. Specifications

General

Guide on inserting the R.A.T. axle correctly and aligning the T-end.

Instructions for rotating the axle 90° clockwise and checking for easy rotation.

How to flip the lever approximately 180° until it stops.

Adjusting the preload nut for proper lever clamping force.

Warning about incorrect closed lever or low clamping force leading to wheel disengagement.