CommandPost Working with Keysets
User Guide
19
If the names do not match exactly, CommandPost
cannot locate the keyset when you launch the appli-
cation. As a result, the functions defined in the key-
set won’t be available when using the application.
If you enter the name of an existing keyset,
CommandPost notifies you that you cannot dupli-
cate the name.
3.
After entering a valid name, click
Create
to create the
new keyset.
4.
Create the functions you want for the keyset. See
“Basic Programming” beginning on page 21 for fur-
ther instructions.
M
ODIFYING
E
XISTING
K
EYSETS
Your CommandPost package contains an assortment of
pre-programmed keysets designed for many of the
most popular multimedia applications. You can use
these keysets as is, or modify them to your own prefer-
ences and work style.
Tip
Changing keysets is
not an undoable operation
.
Therefore, before making changes to an existing keyset,
consider renaming that keyset so you can restore it later
if necessary. See “Renaming Keysets” beginning on
page 20.
To Next Page
Loading...