CommandPost Programming the Takebar
User Guide
27
gram various commands to invoke at a position. The
Takebar may also carry out some custom functions in
certain applications. Check the FOCUS Enhancements
website for more information (http://www.FOCUS-
info.com).
To program the Takebar:
1. Click the Takebar button in the Controller Options
section.
CommandPost displays an enlarged view of the
Takebar with its eight programmable key positions.
2. Select the position (or, button) you want to pro-
gram. You can select it in either the Controller
Options area or the Trigger/Functions List.
3. Enter a name for the sequence in the Function Name
box. For this example, the name is Zoom In.
4. Click inside the Keystroke Entry Box. CommandPost
draws a box around the object to show it is selected.
2
3
45
1
To Next Page
Loading...