Focus TView Pro AV - Page 17

TView Pro AV User's Manual Rev 2.01
17
3.1.20 Auto Reset
This control resets the TView Pro AV to its default settings. Default Settings are as follows:
Function Auto Reset Parameter Value
Horizontal/Vertical Position Best Factory Estimate
Horizontal/Vertical Size Best Factory Estimate
Zoom Off
Compress Off
UnderScan Overscanned
Terminate TERMINATED
Fine Genlock H Position Best Factory Estimate
Coarse Genlock H Position Best Factory Estimate
Genlock Subcarrier Phase Best Factory Estimate
Genlock Subcarrier Phase Reverse 0 degrees
Genlock Termination Genlock input Unterminated
NTSC/PAL as originally shipped
Sharpness FLICKER OFF
LumaFilter Off
Brightness Boost Off
Saturation Attenuation Off
Freeze Frame INPUT LIVE
YUV/RGB Selection RGB OUTPUT
Sync Selection IN = VGA SYNC