INTRODUCTION - GETTING STARTED
Thank you for purchasing Liquid Mix. This User Guide provides detailed instructions on how to operate both
the hardware control surface and software GUI (Graphical User Interface) of Liquid Mix. Before reading this
User Guide it is assumed that you have run the Installer found on the accompanying Resources disc. This will
install the Liquid Mix Manager application, the Liquid Mix plug-in software and EQ/Compressor emulations
onto your computer.
Once done, you can connect the Liquid Mix hardware to your computer using the supplied Firewire cable and
begin applying vintage flavours to your mix. Make sure the hardware is connected before booting up the
sequencer, otherwise the plug-ins may be made inactive.
To Next Page
Loading...